Raised-panel doors, ogee edges, coves, beads and crown molding all have one thing in common: they're hard to sand evenly with a flat sheet of sandpaper. Folded paper either rounds over crisp details or cuts through the high spots while missing the low ones. That's where a flexible sanding sponge earns its place. Here's when to reach for foam, when sandpaper is still the better choice, and which grits to use on cabinet work.
The short answer
| Surface | Best tool | Why |
|---|---|---|
| Profiles, moldings, coves and beads | Flexible foam pad or block | The foam follows the shape and spreads pressure evenly |
| Large flat panels and tabletops | Sandpaper on a hard block or a sander | A hard backing keeps the surface flat |
| Inside corners, grooves and narrow slots | Sanding stick or twig | Narrow and firm enough to get into tight spots |
| Scuffing between coats of finish | Fine foam pad (240) | A light, even scuff without cutting through edges |
Why foam works better on profiles
- It follows the shape. A soft foam back bends into coves and over beads, so the whole profile gets sanded evenly instead of just the high points.
- It's easier on edges. Sharp edges and the tops of profiles are where finish usually gets cut through. Foam spreads the pressure, so it's less likely to burn through an edge.
- It lasts longer. Sandpaper creases and tears when you fold it around a molding. A foam pad or block holds its shape, and when it clogs you can rinse it and keep going.
When sandpaper is still the right choice
Foam bends, which is exactly what you don't want on a large flat surface. For tabletops, flat door panels and edges that need to stay dead flat and square, use sandpaper on a hard block or a random orbital sander. Sandpaper also comes in finer grits for final polishing work.
Grits for cabinet work
| Step | Grit | Durasand pick |
|---|---|---|
| Heavy shaping or removing old finish | 60 to 100 | Coarse 4-Sided Sanding Block (60) or Coarse High Flex Pad (100) |
| Smoothing bare wood before stain or paint | 180 | Medium High Flex Pad (180) or Fine 4-Sided Block (180) |
| Between coats, or scuffing an old finish before repainting | 240 | Fine High Flex Pad (240), light pressure |
Work up through the grits without skipping more than one step, and sand bare wood with the grain. Our foam pads and blocks work wet or dry, but save wet sanding for finishes and paint. Water raises the grain on bare wood. Wipe off all the dust before you apply stain or finish.
Tips for better results
- Let the foam do the work. Press harder to cut faster and lighter for a smoother finish.
- Use the right part of the block. The flat faces of a 4-Sided Flexible Sanding Block handle flat stretches and edges, and the block flexes enough for gentle curves and moldings.
- Keep your grits sorted. High Flex Pads are color-coded: purple is Coarse (100), orange is Medium (180) and blue is Fine (240).
- Get into the details. For tight inside corners and the bottom of narrow grooves, finish with a Sanding Stick or Sanding Twig.
Stocking a cabinet shop
The Woodworking and Cabinet Kit includes six 4-Sided Flexible Sanding Blocks and twelve High Flex Pads in every grit, plus sticks and twigs for detail work. For production sanding, the High Flex Pads Bulk Case of 250 skips the retail packaging. Shops that buy regularly can also ask about dealer pricing. See the Grit Guide for the full chart.